Trailer 12″ Brake Drum 2T

Previous Next

Trailer 12″ Brake Drum 2T

EHD12

These trailer 12″ brake drums are suited for axles that use hydraulic or electric brakes. Each brake drum comes with pre-pressed cups and all fittings are included.

Description

The 12″ brake drum is one of the most heavy duty styles of drum used on the largest trailers rated upto 2400kg per set of drum. Each drum comes complete with the bearings, seal, dust cap and nuts you need to safely replace the drums on your trailer. Designed for industrial and agricultural use on most 2T 50mm axles, 63mm and 65mm axles. If you aren’t sure what bearing style or stud pattern you have please view the downloadable resource pdf attached or contact on of our friendly staff. These drums EHDLC12N6 and EHDLC12N5 are a direct replacement for the Dexter style of 12″ drum 2T and EHDLC12N2A is a direct replacement for Alko style of 12″ drum 2T(Part No. 429000)

Advantages

Pick your stud pattern
Pick your bearing style
Pre-pressed bearing cups
Fittings included
Natural finish
SG casted iron

What’s Included

1 x Trailer 12″ Brake Drum
1 x Inner Cup & Cone
1 x Outer Cup & Cone
1 x Oil Seal
1 x Dust Cap to suit
Wheel Nuts to suit

Note the “Bare” option has no fittings or cups.

Additional information

Stud pattern	Landcruiser 5 Stud, Landcruiser 6 Stud
Bearing type	2T 25580/15123, HR30210J/15123

STUD PATTERN

STUD PATTERN	STUD PCD	STUD DISTANCE	COMMON STUD SIZE
FORD	5 x 114.3mm	67.18mm	1/2"
COMMODORE	5 x 120mm	70.53mm	7/16"
HQ HOLDEN	5 x 120.65mm	70.91mm	7/16"
HT HOLDEN	5 x 108mm	63.95mm	7/16"
LANDCRUISER/NISSAN	6 x 139.7mm	69.85mm	1/2"
LANDCRUISER 100 SERIES	5 x 150mm	88.20mm	9/16"
GEMINI	4 x 100mm	70.71mm	7/16"
DATSUN	4 x 114.3mm	80.80mm	7/16"